Ariens 911152 BR21SP 用户手册

GB - 9

1. Remove mower and handlebar from 

carton.

2. Install the handlebars on the pivot pins 

attached to the handlebar uprights.

NOTE: Make sure the cables (connected to 
the handlebar) are on the left side of the unit.

3. Remove the handlebar mounting 

hardware from the handlebar uprights.

4. Rotate the handlebar up or down to the 

desired height and align the mounting 
holes with the holes in the handlebar 
upright.

5. Secure the handlebars in position with 

hardware removed in step 3.

6. Connect the engine/blade control cable 

to the engine.
Route the z-bend cable end into engine 
shutoff lever as shown below.

Insert the cable connector into the cable 
mounting bracket on the engine. Make 
sure the connector snaps into place 
securely.

CAUTION: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

Figure 3

1. Mower Unit
2. Mulch Cover
3. Side Discharge Chute
4. Mulch Plug
5. Literature Pack
6. Grass Bag

OM1706

Figure 4