Briggs & Stratton FIELD and BRUSH MOWER 用户手册
CALL
TOLL-FREE
1-800-DR-OWNER 19
Connecting the TOW-BEHIND DR FIELD and BRUSH MOWER to your Tow Vehicle
The Versa-Hitch™ on the TOW-BEHIND DR FIELD and BRUSH MOWER Out-Rigger™ Tow Bar has five (5)
positions to accommodate different Tow Vehicle hitch heights (Figure 11). The Versa-Hitch™ positions are
also for leveling the machine according to the Cutting Height setting of the machine. See page 24.
also for leveling the machine according to the Cutting Height setting of the machine. See page 24.
NOTE: If the Hitch Plate on your Tow Vehicle is too thick (more than 3/8" thick) for the openings in the Versa-
Hitch™, attach the supplied Hitch Extender (Figure 12) to your Tow Vehicle using the hardware provided.
1. Move your Tow Vehicle to a reasonably flat area and set the Parking Brake. Lift the Versa-Hitch™
and slide one of its position openings onto the Hitch Plate of your Tow Vehicle.
USE THE VERSA-HITCH™ POSITION THAT MAKES THE OUT-RIGGER™ TOW BAR LEVEL WITH THE
GROUND.
GROUND.
2. Align the hole in the center of the Hitch Plate on your Tow Vehicle with the hole in the Versa-
Hitch™. Insert the Hitch Pin and attach the Safety Hitch Clip (Figure 11).
Versa-Hitch™ Position Openings
Hitch Pin
Figure 11
Figure 12
Hitch Extender
Hitch Plate
Tow Vehicle
Hitch Plate
Safety Hitch Clip
Versa-Hitch™