Dixon CE RAM 用户手册

Tracking
1. Tracking adjustment is accomplished using

the tracking bolts. The tracking bolts act as a
limiting device for the motion control levers
when in the full-forward position.

2. Start by loosening jam nut on right tracking

bolt. Back the tracking bolt out until flush with
nut.

3. Loosen tracking bolts and back out until flush

with nut.

4. Move unit to an open unobstructed area

such as an empty parking lot or open field for
tracking adjustment.

5. Test operate unit by driving it at full throttle

and full forward position on both motion
control levers. Gradually turn in the tracking
bolt on the right hand side until the unit
noticeably starts drifting right.

6. Stop the unit and tighten right jam nut in this

position.

7. Restart the unit and drive forward at full

throttle with both motion control levers in full
forward position.  Gradually turn in the
tracking bolt (left side) until unit tracks
straight.

6.0

6.0

5.5

5.0

4.5

8. Stop the unit and tighten left jam nut in this

position.