Husqvarna 326SX-Series 用户手册

 

English

 

 – 7

  

′′′′

 

This section describes the machine

 

′

 

s safety equipment, its 

purpose, and how checks and maintenance should be carried 
out to ensure that it operates correctly. See the ”What is 
what?” section to locate where this equipment is positioned 
on your machine.

The life span of the machine can be reduced and the risk of 
accidents can increase if machine maintenance is not carried 
out correctly and if service and/or repairs are not carried out 
professionally. If you need further information please contact 
your nearest servicing dealer.

 

The throttle lock is designed to prevent accidental operation 
of the throttle control. When you press the lock (A) (i.e. when 
you grasp the handle) it releases the throttle control (B). 
When you release the handle the throttle control and the 
throttle lock both move back to their original positions. This 
movement is controlled by two independent return springs. 
This arrangement means that the throttle control is 
automatically locked at the idle setting.

Make sure the throttle control is locked at the idle setting 
when the throttle lock is released.

Press the throttle lock and make sure it returns to its original 
position when you release it.

Check that the throttle control and throttle lock move freely 
and that the return springs work properly.

See instructions under the heading Start. Start the machine 
and apply full throttle. Release the throttle and check that the 
sweeper rollers stops and remains at a standstill. If the 
sweeper rollers rotates with the throttle in the idle position 
then the carburettor idle setting must be checked. See 
instructions under the heading Maintenance.

 

Use the stop switch to switch off the engine.

Start the engine and make sure the engine stops when you 
move the stop switch to the stop setting.

 

Your machine is equipped with a vibration damping system 
that is designed to reduce vibration and make operation 
easier.

IMPORTANT! All servicing and repair work on the machine 
requires special training. This is especially true of the 
machine

 

′

 

s safety equipment. If your machine fails any of the 

checks described below you must contact your service 
agent. When you buy any of our products we guarantee the 
availability of professional repairs and service. If the retailer 
who sells your machine is not a servicing dealer, ask him for 
the address of your nearest service agent.