Motorola wirelessfence25 用户手册
20
Using the Pet Collar Unit
3. Using the Pet Collar Unit
3.1
Powering On/Off the Pet Collar Unit
To power on, press and hold POWER KEY
on the Pet Collar Unit.
The unit vibrates once and the Power LED lights up in green for 3 seconds.
To power off, press and hold POWER KEY
on the Pet Collar Unit.
The unit vibrates twice and LED light goes off.
3.2
Pairing the Pet Collar Unit with the Wireless Fence Unit
Your Wireless Fence Pet Training System can pair with up to 2 Pet Collar Units.
The Wireless Fence Unit and Pet Collar Unit provided are already paired. They
will communicate with each other once they are powered on. You do not need
to pair them again unless the Pet Collar Unit loses its link with the Wireless Fence
Unit. To pair them again, or pair a new Pet Collar Unit, follow the procedures
below:
The Wireless Fence Unit and Pet Collar Unit provided are already paired. They
will communicate with each other once they are powered on. You do not need
to pair them again unless the Pet Collar Unit loses its link with the Wireless Fence
Unit. To pair them again, or pair a new Pet Collar Unit, follow the procedures
below:
1.
Power on both the Wireless Fence Unit and Pet Collar Unit (see “Powering
On/Off the Wireless Fence Unit” on page 21 and “Powering On/Off the
Pet Collar Unit” on page 20).
On/Off the Wireless Fence Unit” on page 21 and “Powering On/Off the
Pet Collar Unit” on page 20).
2.
Press MENU KEY
on the Wireless Fence Unit.
The screen displays a blinking
symbol.
3.
Press and hold PAIR KEY
on the Pet Collar Unit to start pairing.
The Power LED blinks in Green on the Pet Collar unit.
4.
If you have only one Pet Collar Unit, press OK KEY on
the
Wireless
Fence Unit once to confirm.
If you have more than one Pet Collar Unit, press
or
to select a
collar number (1 or 2) and press OK KEY
to confirm.