Campbell Hausfeld PW1686 用户手册

1

4

2

3

5

6

7

20

8

9

10

11

9

12

9

13

14

15

18

17

16

19

GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fitting

on the unit (this may already be
attached to the pump).

2. Attach quick connect fitting to    gar-

den hose.

3. Pull side “A” of quick connect fitting

toward garden hose and push onto
nipple adapter.

4. Push side “A” of quick connect fitting

towards nipple adapter and release.

"A"

Quick Connect Fitting

Garden Hose

Nipple
Adapter

This pressure washer is equipped with a
microswitch sensitive to water flow. This
Instant Start/Stop switch (ISS) senses
water flow in the pump. When the trig-
ger is released, water stops flowing
through the pump. The ISS then auto-
matically turns the motor off to protect
pump from overheating.

OPERATION
1. Pull trigger on gun.

2. Turn the “ON/OFF” switch to “ON”.

3. Release trigger. The pressure washer

motor will stop running.

4. To spray again, pull trigger and motor

and pump will restart.

Note: Occasionally the motor may run
for a short time to bring fresh, cool
water into the pump even if trigger is
released. This is part of normal opera-
tion and will not damage the unit.

!

WARNING

!

CAUTION

!

CAUTION

1. Plug the power cord into a ground-

ed 120V outlet and press the reset
button as shown in Figure 7.

2. THIS MUST BE DONE EACH TIME THE

UNIT IS PLUGGED IN AN OUTLET.

Reset