Black Box MPSH16-D20-120V 用户手册

 

1.  Access Command Mode:  The Outlet Managed PDU includes two separate 

user interfaces; the Text Interface and the Web Browser Interface.  The Text 

Interface is available via Local PC, SNMP, SSH Client, Telnet, or Modem, 

and the Web Browser interface is only available via TCP/IP network.  In 

addition, when contacted via PDA, the Outlet Managed PDU will also 

present a third interface, which is similar to the Web Browser Interface, but 

offers limited command functions.

a)  Via Local PC:  Start your communications program and then 

press [Enter].

b)  Via SSH Client:  Start your SSH client, enter the default IP address 

(192.168.168.168) for the Outlet Managed PDU and invoke the  

connect command.

c)  Via Web Browser:  Make certain that Web Browser access is enabled 

as described in the Section 5.9.2.  Start your JavaScript enabled 

Web Browser, enter the default Outlet Managed PDU IP address 

(192.168.168.168) in the Web Browser address bar, and then  

press [Enter].

d)  Via Telnet:  Make certain that Telnet access is enabled as described in 

Section 5.9.2.  Start your Telnet client, and enter the Outlet Managed 

PDU’s default IP address (192.168.168.168).

e)  Via Modem:  Make certain that the Outlet Managed PDU’s serial 

Console Port is configured for Modem Mode as described in Section 5.8, 

then use your communications program to dial the number for your 

external Modem connected to the Console Port.

2.  Username / Password Prompt:  A message will be displayed, which 

prompts you to enter your username and password.  The default username 

is "

super" (all lower case, no quotes), and the default password is also 

"

super".  If a valid username and password are entered, the Outlet Managed 

PDU will display either the Main Menu (Web Browser Interface) or the Port 

Status Screen (SSH, Telnet, or Modem.)

3.  Test Switching Functions:  You may wish to perform the following tests 

in order to make certain that the Outlet Managed PDU is responding to 

commands.  When switching and reboot commands are executed, the Outlet 

Managed PDU’s Output Status LEDs will also turn On or Off to indicate the 

status of each outlet.