Black Box MPSH16-D20-120V 用户手册

CHAPTER 17: Command Reference Guide

179

Log Functions

Provides access to a menu which allows you to display the Audit Log, Alarm Log

Current Metering Log and Power Metering Log. For more information on Log

Functions, please refer to Section 5.3.3 and Section 8.
Availability: Administrator, SuperUser
Format:

/L [Enter]

Current Metering Status

Displays the Current Metering Status Screen, which lists current, voltage and power

readings, and also lists the trigger settings for the Over Temperature Alarm and the

Over Current Alarm. For more information on Current Metering, please refer to

Section 8.5. For more information on Alarm Configuration, please refer to Section 7.
Availability: Administrator, SuperUser
Format:

/M [Enter]

Display Site ID / Unit Information

Displays the user-defined Site I.D. message. If the optional asterisk (*) argument is

included in the command line, the command will also show model numbers, current

ratings, and software versions for the Outlet Managed PDU.
Availability: Administrator, SuperUser, User, ViewOnly
Format:

/J [*] [Enter]

Where

* (asterisk) is an optional command argument, that is used to display the

model number, current rating and software version for the Outlet Managed PDU.

17.3.2. Control Commands

Exit Command Mode

When issued at the Network Port, also ends the Telnet session.

Note:

If the /X command is invoked from within a configuration menu,
recently defined parameters may not be saved. In order to make
certain that parameters are saved, always press the [Esc] key
to exit from all configuration menus and then wait until "Saving
Configuration" message has been displayed and the cursor has
returned to the command prompt before issuing the /X command.

Availability: Administrator, SuperUser, User, ViewOnly
Format:

/X [Enter]