Black Box MPSH16-D20-120V 用户手册

 

5.3.6.1.  Automated Mode
The Automated Mode allows the Outlet Managed PDU to execute switching and 

reboot commands, without displaying menus or generating response messages.  

Automated Mode is designed to allow the Outlet Managed PDU to be controlled by 

a device which can generate commands to control power switching functions without 

human intervention.

When Automated Mode is enabled, power switching and reboot commands are 

executed without a confirmation prompt and without command response messages; 

the only reply to these commands is the command prompt, which is re-displayed 

when each command is completed.

Although Automated Mode can be enabled using either the Web Browser Interface 

or Text Interface, Automated Mode is designed primarily for users who wish to send 

ASCII commands to the Outlet Managed PDU without operator intervention, and 

therefore does not specifically apply to the Web Browser Interface.  When Automated 

Mode is enabled, the Web Browser Interface can still be used to invoke switching 

and reboot commands.

Notes:

To enable/disable the Automated Mode, go to the System Parameters menu (see 

Section 5.3,) and then set the "Automated Mode" option to "On".  When Automated 

Mode is enabled, Outlet Managed PDU functions will change as follows:

1.  All Password Security Suppressed:  When a user attempts to access 

command mode, the password prompt will not be displayed at either the 

Setup Port or Network Port.  Unless specifically restricted by the IP Security 

Function, all users will be allowed to access both switching and configuration 

functions, and all commands will be immediately accepted without the 

requirement to enter a password.