Kärcher K 3.49 M 用户手册

下载
页码 52
English
WARNING!
When using this product basic 
precautions should always be 
followed, including the following:
„
Read all the instructions before us-
ing the product.
„
To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.
„
Know how to stop the product and 
bleed pressures quickly. Be thor-
oughly familiar with the controls.
„
Stay alert – watch what you are do-
ing.
„
Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.
„
Keep operating area clear of all per-
sons.
„
Do not overreach or stand on unsta-
ble support. Keep good footing and 
balance at all times.
„
Follow the maintenance instructions 
specified in the manual.
„
This Product Is Provided With A 
Ground Fault Circuit Interrupter Built 
Into The Power Cord Plug. If Re-
placement Of The Plug Or Cord Is 
Needed, Use Only Identical Re-
placement Parts.
„
Risk of Injection or Injury – Do Not 
Direct Discharge Stream At Per-
sons.
„
High pressure jets can be dangerous 
if misused. The jet must not be di-
rected at persons, animals, electrical 
devices, or the machine itself.
„
Wear safety goggles.
„
Do not use acids and solvents in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the machine.
„
To reduce the risk of electrocution, 
keep all connections dry and off the 
ground. Do not touch plug with wet 
hands.
„
The Trigger Gun Safety Lock PRE-
VENTS the trigger from accidentally 
being engaged. This safety feature 
DOES NOT lock trigger in the ON 
position.
„
Do not use extension cord with this 
unit.
WARNING
Do not spray electrical apparatus and 
wiring.
Do not use with flammable liquids and 
toxic chemicals
.
Injection hazard: equipment can cause 
serious injury if the spray penetrates the 
skin. do not point the gun at anyone or 
any part of the body. In case of penetra-
tion seek medical aid immediately.
 
This system is capable of producing 
12400 kPa /1800 PSI to avoid rupture 
and injury, do not operate this pump 
with components rated less than 
12400 kPa /1800 PSI working pressure 
(including but not limited to spray guns, 
hose and hose connections).
Before servicing, cleaning or removing 
any parts, shut off power and relieve 
pressure
.
IMPORTANT SAFETY INSTRUCTIONS