Husqvarna 966067101 用户手册

MAINTENANCE

23

Allow the engine to cool.

1. 

Disconnect the spark plug.

2. 

Tip the machine forward; see the section “Two 

3. 

minute rule”.

Remove e-rings (1) (locking washer type) that hold 

4. 

the blade shaft  (2) in place (see the illustration).
Inspect the blade shafts and replace if bent or 

5. 

worn.
Drive the blade shafts out towards the center. The 

6. 

blades (4) and the plastic spacers (3) will fall off.
Fit the new blades and replace the plastic spacers 

7. 

as necessary. Refer to the illustration of the 
components for blade/spacer placement.
Install e-rings.

8. 

Repeat this procedure for the remaining three 

9. 

shafts.
Reattach the spark plug cable.

10. 

Two Minute Rule.

1

2

3

4