Husqvarna ST 224 用户手册

5

and maintenance of the product.
Your new snow thrower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping 

purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts 

bag. To ensure safe and proper operation of your snow thrower, all parts and hard ware you assemble must be tightened 

se cure ly. Use the correct tools as nec es sary to ensure proper tightness.

1.  Remove all accessible loose parts and parts boxes 

from carton.

2.  Cut down all four corners of carton and lay panels flat.
3.  Remove the two (2) screws securing the auger housing 

to the pallet and remove additional steel brackets from 

skid plate if equipped.

4.  Remove all packing materials.
5.  Remove plastic ties securing the snow thrower to the 

pallet.

6.  Remove snow thrower from carton and check carton 

thor ough ly for ad di tion al loose parts. 

Store the extra shear bolts, nuts and multi-wrench provided 

in parts bag.
NOTE: The multi-wrench may be used for assembly of the 

chute rotator head to snow thrower and making ad just ments 

to the skid plates.
UNFOLD UPPER HANDLE (See Figs. 1-3)
1.  Raise upper handle to the operating position. 

2.   Adjust the handle height to desired position using the 

appropriate mounting holes and tighten lower handle 

knobs securely.  

3.    Install the additional carriage bolts, washers and handle 

knobs that are supplied in the bag of parts to secure 

upper handle to lower handle.