Husqvarna 10527STE 用户手册

5

Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new snow thrower.

Your new snow thrower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping 
purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts 
bag. To ensure safe and proper operation of your snow thrower, all parts and hard ware you assemble must be tightened 
se cure ly. Use the correct tools as nec es sary to ensure proper tightness.

1.   Remove all accessible loose parts and parts boxes 

from carton.

2.   Cut down all four corners of carton and lay panels 

fl at.

3.      Remove all packing materials ex cept plastic tie holding 

speed control rod to lower handle.

4.    Remove snow thrower from carton and check carton 

thor ough ly for ad di tion al loose parts. 

A toolbox is provided on your snow thrower. The toolbox 
is located on top of the belt cover.  Store the extra shear 
bolts, nuts and multi-wrench provided in parts bag in the 
toolbox.

NOTE: The multi-wrench may be used for assembly of the 
chute rotator head to snow thrower and making ad just ments 
to the skid plates.

UNFOLD UPPER HANDLE
1.      Raise upper handle to the operating position and tight en 

handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1.    Remove plastic tie securing rod to lower handle.

2.    Insert rod into speed control bracket and secure with 

retainer spring.