Husqvarna 16530 EXL 用户手册

6

(See Figs. 3 and 4)
The traction drive control rod is installed on the snow 

thrower.
1.  Remove plastic tie securing rod to lower handle.
2.  With top end of rod positioned under left side of control 

panel, push rod down and insert top end of rod into hole 

in drive control bracket.  Secure with retainer spring.

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)
1.   Retrieve vinyl sleeve and spring from bag of parts and 

retrieve the auger control rod from carton chute tray.  

Slide straight rod end through the small hole in the 

vinyl sleeve. Hook spring in hole in rod end.

2.  Hook end of spring into control arm with loop opening 

up as shown. (See Fig. 5)

3.  With top end of rod positioned under right side of 

control panel, push down on rod and insert end of rod 

into hole in auger control bracket.  Secure with retainer 

spring.