LevelOne POT-1110 552022 产品宣传页



POT-1110

H/W Version: 1

The POT system, one master & one slave units, provide 

a long-reach Ethernet extension with remote Power-

over-Ethernet (PoE) capability over a 2-wire line.  

Connection with a Class 0 PD device, the distance 

of two-wire 24AWG cables can be up to 400 meters 

when using a 48Watt high power PoE Switch, 

FSW-0513/0543. Users may select a fixed data rate for 

different copper line ranging. The maximum data rate 

can be up to 60 Mbps full duplex for 2-wire line.

 

The POT master unit is powered by the local PoE 

Ethernet network, and transmits both the data and 

power to the remote slave unit over 2-wire cable. The 

remote unit regenerates the power and provides the 

PoE capability to power up the remote PD device up 

to 15 watts when connecting to 48Watt High Power 

Switch, FSW-0513. The POT M/S supports the indoor & 

outdoor models with wall-mount feature.

 

Equipped with dip switches, the 2-wire line speed 

can be configured to meet different line gauges and 

distances.  A POT pair offers a cost effective solution 

for remote power applications such as LAN-to-LAN 

connectivity, Video Streaming, FTTB, and MDU/MTU 

over single twisted line. 

POT-1110 is IP66-compliant meaning it is 

weatherproof from snow, rain, typhoons, desert 

heat, etc. This PoE Repeater is up to the challenge for 

deployment in any harsh weather condition!

-  Two-wire cables are used to connect 100Mbps Fast 

Ethernet PoE devices

-  Maximum distance up to 400 meters for 24 AWG 

cable 

-  Maximum data rate up to 60Mbps full duplex

-  Remote PoE capability for PD devices of WiFi AP, IP 

camera, IP telephones

-  Up to 15 Watts for remote PoE, Depending on PSE 

power

-  Easy installation by indoor & outdoor different 

models

-  Dip Switches for 2-wire line rate settings

-  Low-Latency for Video/Voice/Data applications

-  IP66 Weatherproof

High-power PoE Injector

1. RJ45 In

2. RJ45 Out

4-Port High Power PoE Switch

1

2