Multiquip DCA10SPXU4 用户手册

This100 VAC, 20 amp GFCI  (Duplex Nema 5-20R)
receptacle can be used anytime the generator is in operation.
The   receptacle is protected by a 20 amp circuit breaker.
The breaker can be located on the generator control panel.

Pressing the 

reset button resets the GFCI receptacle after

being tripped. Pressing the 

Test Button (See Figure 6) in

the center of the receptacle will check the GFCI function.
This receptacle should be tested at least once a month.

Turn the 

voltage regulator control knob  (Figure 10) on

the control panel to obtain the desired voltage. Turning the
knob clockwise will

 increase the voltage, turning the knob

counter-clockwise will 

decrease the voltage.

There is one CS-6369 100/200V, 45 amp auxilliary twist-
lock receptacle (Figure 7) provided on the output terminal
panel. This receptacle is protected by a 45 amp circuit
breaker.

There is one L5-30R, 100 VAC 30 amp auxilliary twist-lock
receptacle (Figure 8) provided on the output terminal panel.
This receptacle is protected by a 30 amp circuit breaker.

There is one L6-30R, 200 VAC 30 amp auxilliary twist-lock
receptacle (Figure 9) provided on the output terminal panel.
This receptacle is protected by a 30 amp circuit breaker.