Multiquip DA700SSW 用户手册

1.  Read safety instructions at the beginning of manual.

2.  Clean the generator, removing dirt and dust, particularly 

the engine cooling air inlet.

3.  Check the air fi lter for dirt and dust. If air fi lter is dirty, 

replace air fi lter with a new one as required.

4.  Check fastening nuts and bolts for tightness

1.  To check the engine oil level, place the generator on 

secure level ground with the engine stopped.

2.  Remove the dipstick from its holder (Figure 7) and wipe 

clean.

3.  Re-Insert dipstick (Figure 8), then remove dipstick from 

its holder. Check the oil level shown on the dipstick.

4.  If the oil level is low, remove the oil fi ller cap (Figure 9) 

and fi ll to a safe operating level (max) as indicated by 
the dipstick. Fill with recommended type oil as listed in 
Table 5. Maximum oil capacity is 2.64 quarts (2.5 liters).

Above 77° F  (25° C)

SAE 30    or  SAE10W-30
                     SAE 15W-40                        

32°~ 77° F

(0° ~ 25° C)

SAE 20    or  SAE10W-30
                     SAE 15W-40

Below 32° F  (0° C)

SAE 10    or  SAE10W-30
                     SAE 15W-40