National Instruments NI 5670 用户手册

© National Instruments Corporation

transparent operation of both modules as a single instrument (the NI 5670/5671/5672) 
using NI-RFSG.

To use MAX to configure, self-test, associate, and generate signals with the 
NI 5670/5671/5672, complete the following steps:

1.

Launch MAX by navigating to Start»All Programs»National 
Instruments»Measurement & Automation or by clicking the MAX 
desktop icon.

2.

In the Configuration pane, double-click Devices and Interfaces to see 
the list of installed devices.

3.

Expand the NI-DAQmx Devices folder. You will see a list of installed 
devices that includes the NI PXI-5610 upconverter module and 
an AWG module.

 if you do not see both the 

NI PXI-5421/5441/5442 AWG module and the NI PXI-5610 upconverter module listed.

If you are using a MXI interface to control a PXI chassis and encounter performance 

or initialization issues, refer to your MXI documentation to ensure that the MXI interface 
is properly set up. Software optimization might be necessary. For MXI-3 optimization, 
select Start»All Programs»National Instruments MXI-3»MXI-3 Optimization. 
MXI-4 optimization is performed automatically by the MXI-4 hardware.

MAX allows you to rename both NI 5670/5671/5672 hardware modules. 
The MAX name is used in software to operate the NI 5670/5671/5672 
hardware resources. You do not have to change the module names from the 
default but doing so can make programming easier.

To rename both NI 5670/5671/5672 hardware modules, complete steps 4 
through 10. If you do not wish to rename the modules, proceed to step 11.

4.

Right-click the NI 5610 upconverter module and select Rename from 
the shortcut menu.

5.

Enter the new name for the NI 5610 upconverter module.

The device name must consist only of alphanumeric and underscore characters.

6.

Click OK.

7.

Right-click the AWG module and select Rename from the shortcut 
menu.

8.

Enter the new name for the AWG module.