National Instruments NI PCI-6552 用户手册

Figure 3.  Configuration Tree Shortcut Menu

b. When the self-test finishes, a message window appears to indicate if 

an error occurred. If an error occurred, refer to 

ni.com/support

 

for troubleshooting information.

If you need to reset the device with a hard reset, you can do so 

by right-clicking the device and selecting Reset Device from the 
shortcut menu shown in Figure 3.

6. Record the device name assigned to the digital device. You need this 

information when you program the device.

To verify your device configuration, use the device test panel in MAX to 
generate and acquire simple digital data using your device by completing the 
following steps:

1. Right-click the device under NI-DAQmx Devices, and select Test Panels 

as shown in Figure 3.

2. Click the Generation tab.

3. Select the Dynamic tab on the side of the pane.

4. Click Select All to select all of your channels. The digital pattern now 

appears in the graph.

5. Enter the frequency in the Clock Frequency control, located on the left 

side of the test panel.