National Instruments NI PXI-5422 用户手册
© National Instruments Corporation
31
NI PXI-5422 Calibration Procedure
4.
Call
niFgen_SetAttributeViReal64
to set the gain (niFgen
property node: Arbitrary Waveform Output»Arbitrary
Waveform Gain) using the following parameters:
Waveform Gain) using the following parameters:
•
vi: The session handle returned from
niFgen_init
•
channelName:
"0"
•
attributeID:
NIFGEN_ATTR_ARB_GAIN
•
value: The Gain value listed in Table 6 for the current iteration
5.
Call
niFgen_SetAttributeViInt32
to choose the positive
full-scale DC waveform (niFgen property node: Arbitrary
Waveform Output»Arbitrary Waveform Handle) using
the following parameters:
Waveform Output»Arbitrary Waveform Handle) using
the following parameters:
•
vi: The session handle returned from
niFgen_init
•
channelName:
"0"
•
attributeID:
NIFGEN_ATTR_ARB_WAVEFORM_HANDLE
•
value: The wfmHandle from step 9 of the
section (positive full-scale handle)
6.
Call
niFgen_InitiateGeneration
(niFgen Initiate Generation VI)
to initiate the waveform generation using the following parameter:
•
vi: The session handle returned from
niFgen_init
7.
Measure the positive DC voltage out of the NI PXI-5422. Record the
positive DC voltage out measurement in the Measured Positive
Full-Scale Value column of Table 6.
positive DC voltage out measurement in the Measured Positive
Full-Scale Value column of Table 6.
8.
Call
niFgen_AbortGeneration
(niFgen Abort Generation VI)
to abort the waveform generation using the following parameter:
•
vi: The session handle returned from
niFgen_init
9.
Call
niFgen_SetAttributeViInt32
to choose the negative
full-scale DC waveform (niFgen property node: Arbitrary
Waveform Output»Arbitrary Waveform Handle) using
the following parameters:
Waveform Output»Arbitrary Waveform Handle) using
the following parameters:
•
vi: The session handle returned from
niFgen_init
•
channelName:
"0"
•
attributeID:
NIFGEN_ATTR_ARB_WAVEFORM_HANDLE
•
section (negative full-scale handle)
10. Call
niFgen_InitiateGeneration
(niFgen Initiate Generation VI)
to initiate the waveform generation using the following parameter:
•
vi: The session handle returned from
niFgen_init