Polycom IP 600 SIP 1.6.X 用户手册
2
Installing SoundPoint
®
IP 600 SIP
This section provides basic installation
instructions and information for obtaining
the best performance with the Sound-
Point
instructions and information for obtaining
the best performance with the Sound-
Point
®
IP 600 SIP phone. If you require
additional information or assistance with
your new phone, please contact your sys-
tem administrator.
your new phone, please contact your sys-
tem administrator.
The SoundPoint
®
IP 600 SIP User Guide
includes regulatory compliance informa-
tion that your system administrator should
review and can also be found at www.
polycom.com.
tion that your system administrator should
review and can also be found at www.
polycom.com.
Connecting Network and Power Source
AC Power Option
Connect the supplied Network cable be-
tween the LAN jack on the phone and the
LAN port on the wall or hub/switch device
port. Connect the DC plug on the AC
wall adapter to the DC jack marked on the
phone.
LAN port on the wall or hub/switch device
port. Connect the DC plug on the AC
wall adapter to the DC jack marked on the
phone.
In-Line Power Option
If the phone is connected to a compatible
Ethernet switch that can provide in-line
power, the phone will use that power op-
tion. Simply plug the supplied Network
cable between the LAN jack on the phone
and an available Power and Data port on
the In-Line Power switch.
power, the phone will use that power op-
tion. Simply plug the supplied Network
cable between the LAN jack on the phone
and an available Power and Data port on
the In-Line Power switch.
Cisco™ Catalyst™ In-Line
Power Switch
Power Switch
IEEE 802.3af compliant
In-Line Power switch
In-Line Power switch
(Optional)