Yamaha 01X 用户手册

01X   Owner’s Manual

r-a From the Selected Channel mode, adjust the desired 

EQ parameter by turning the corresponding knob.

r-b From the Multi Channel mode, press the same EQ 

button (as in step 2 above) repeatedly to select the 

desired parameter.  

Adjust the parameter for each channel with the corre-

sponding knob. 

EQ-ON

ATT

EQHM-Q EQHM-F EQHM-G

SEL<CH1 >

ON

0.0

0.70

4.00k

0.0

On/Off

Attenuation 
(input signal level)

Q (bandwidth)

Frequency

Gain

EQ HIGH-MID GAIN

+ 3.0

- 1.1

- 2.1

EQ HIGH-MID FREQUENCY

1.00k

4.50k

3.55k

EQ HIGH-MID Q

0.70

0.90

0.56

EQ ON

OFF

ON

ON

EQ HIGH-MID

SEL<CH1 >

EQ-ON

ATT

EQHM-Q EQHM-F EQHM-G

EQ-ON

ATT

EQHM-Q EQHM-F EQHM-G

SEL<CH1 >

ON

0.0

0.70

4.00k

0.0

To check the Q value, 
press [NAME/VALUE] button.

● EQ parameters/ranges

Gain
Determines the amount of level boost or cut in the sig-
nal at the frequency specified below.

Range: -18.0 dB — +18 dB

Frequency
Determines the central frequency at which the signal is 
boosted or cut.

Range: 21.2 Hz — 20.0 kHz

Q
Determines the bandwidth of the EQ processing.  The 
larger the value, the greater the range of affected fre-
quencies (around the central frequency); the smaller 
the value, the narrower the frequency range.

Range/Settings: 10.0 (wide) — 0.10 (narrow)

L.SHL, HPF (LOW band only)
H.SHL, LPF (HIGH band only)