Aviom A-16II 用户手册

34

auxiliary sends, you can use the same techniques as described for live 

audio monitor mixes.

In the studio, performers also need to listen back to tracks they have just 

recorded. If each performer is using a different mix while recording, 

playback of the track will be different in each set of headphones.

If you can dedicate two inputs on the input module for playback, you can 

easily provide the performers with a high-quality playback of the track they 

have just recorded. Here’s how to set it up:

• Set aside the first fourteen Channels of the input module for 

audio tracks to be sent to the performers as a cue mix.

• The remaining two channels are reserved for the stereo mix 

that the engineer creates in the studio.

• Connect cables from the console for monitoring the fourteen 

performer Channels as described previously. Use direct 

outputs, aux sends, etc. 

• Patch the stereo mix output that you want the performers to 

hear into the remaining two Input module inputs.

The idea is that you will create two Presets on the Personal Mixers for the 

performers. The first is their standard cue mix. It uses fourteen channels; 

the last two are muted. They can change it as needed while they work. The 

other Preset is the exact opposite. The performer’s fourteen cue channels 

are muted and the two channels containing the engineer’s playback mix are 

on. 

For the example, let’s assume that Channels 1 through 14 are used for 

performer cue playback. Channels 15 and 16 will be used to play back the 

recorded track.

To complete the setup:

• On the input module front panel, set the Link switch on 

Channels 15 and 16 to the linked position.

• On each Personal Mixer create a basic mix of the fourteen 

channels of audio.

• Mute Channels 15 and 16.
• Save the Preset (to location #1, for example).
• Create another Preset that has the first fourteen channels 

muted. (Shortcut: Start by recalling the All Channels Zero 

Preset by holding 

 and then pressing M

.)

• Set a volume for the playback on Channels 15 and 16.
• Save the Preset (to location #16, for example).