Roland PCR-800 用户手册

 

Normally, the velocity value of the transmitted notes will vary depending on how strongly you play the keyboard.
If desired, you can also specify a fixed velocity at which all notes will be transmitted regardless of how strongly you play the keyboard.

 

This is convenient when you want to record into your DAW software at a fixed velocity.
You can also adjust the sensitivity or velocity curve as desired.

 

If you want to use a fixed velocity, you’ll need to set the “VALUE ENCODER” system 
setting for [USER] to “Key Velocity.”

 

If “KEY VELOCITY” is assigned to the VALUE encoder, you can use the following 
procedure to transmit bank select (MSB, LSB) messages.

 

fig.H-User.eps

 

Press the [USER] button.
The [USER] button will light. The display will 
indicate the most recently transmitted velocity 
value.

 

Use the VALUE knob to specify the velocity 
value (tch, 1–127) that you want to transmit.

 

fig.D-tch.eps

 

 

Here’s how to change the VALUE knob’s [USER] button assignment to “Key Velocity.”

Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”

Press the [USER] button. It will light, and the display will indicate the 
currently assigned parameter.

Use the VALUE knob to select “VEL,” and press the [ENTER] 
button.
This completes the setting; you will return to Play mode.

PCR-300_500_800_e.book 38 ページ ２００６年１２月１９日　火曜日　午後２時５９分