Roland PCR-800 用户手册
70
System settings
Here’s how to specify whether F8 Clock will be transmitted.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY00,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1] and [A2] to turn F8 Clock on or off.
The display will indicate “ON” or “OFF.”
The display will indicate “ON” or “OFF.”
5
Press the [ENTER] button to return to Play mode.
Here’s how to specify the initial tempo of the F8 Clock when “F8 Clock” is On. After
you turn on the power, this tempo will be transmitted until you move the VALUE knob
to which Tempo is assigned. (->
you turn on the power, this tempo will be transmitted until you move the VALUE knob
to which Tempo is assigned. (->
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY01,” and press the [ENTER] button.
4
Use the VALUE knob to set the F8 Clock Default Tempo to a value within the 20–
250 range.
The display will indicate the value you specify.
250 range.
The display will indicate the value you specify.
5
Press the [ENTER] button to return to Play mode.
Clock settings
F8 Clock On/Off
F8 Clock Default Tempo
PCR-300_500_800_e.book 70 ページ ２００６年１２月１９日 火曜日 午後２時５９分