Roland pt-2700 用户手册

Getting Started

Turning the Power On and Off

941

NOTE

Once the connections have been completed, turn on power to your
various devices in the order specified. By turning on devices in the
wrong order, you risk causing malfunction and/or damage to
speakers and other devices.

■ Turning on the power

1. Before you switch on the power, turn the

volume all the way down by using the
[VOLUME] slider.

fig.3-05

2. Press the [Power] switch, to turn on the

power.

fig.3-06.e

The power will turn on, and the Power indicator at the

left front of the pt-2700 will light.

fig.00-06.e

After a few seconds, the keyboard will produce sound

when played. Adjust the volume appropriately.

942

NOTE

This unit is equipped with a protection circuit. A brief interval (a
few seconds) after power up is required before the unit will operate
normally.

■ Turning off the power

1. Before switching the power off, turn the

volume all the way down by using the
[VOLUME] slider.

fig.3-05

2. Press the [Power] switch, to turn off the

power.

fig.3-07.e

The Power indicator at the left front of the pt-2700 will

go dark, and the power will be turned off.

Adjusting the Volume

Use the [VOLUME] slider to adjust the overall volume.

fig.3-08

Setting the Music Stand

Insert the music stand into the two holes as shown in the

figure below.

fig.3-02

NOTE

Before moving the pt-2700, be sure to remove the music stand as a
safety precaution.

Lower position

Power Indicator

Power

OFF

Upper position