Roland MC-909 用户手册
34
Playing a pattern
Mix In
The sound of a device connected to the INPUT jacks or the digital in
connector can be mixed into the output.
connector can be mixed into the output.
You can also use the velocity pads to play different pitches using the
input sound.
input sound.
Directly outputting the sound of
an external device
an external device
1.
In the sampling section, press [MIX IN] so its
indicator is lighted.
The sound of the external device will be mixed into the output.
2.
To cancel the Mix In function, press [MIX IN] once
again so its indicator goes out.
Playing various pitches using the
sound of an external device
sound of an external device
1.
Press and hold [MIX IN].
The Mix In select sub window will appear.
2.
Continuing to hold down [MIX IN], press [F6 (Velo
Pads)] or turn [VALUE] to select “VELOCITY PADS.”
The indicator will blink, and now you can use the velocity pads
to change the pitch of the input sound.
to change the pitch of the input sound.
3.
Play the velocity pads.
You can control the pitch and duration just as on a conventional
keyboard.
keyboard.
When you press pad 2 (C4), the input sound will be heard at its
original pitch.
original pitch.
You can play the input sound in a range of 14 semitones higher
(pad [16]) through 25 semitones lower (pad [1] with [OCT -]
pressed twice) than the original pitch.
(pad [16]) through 25 semitones lower (pad [1] with [OCT -]
pressed twice) than the original pitch.
*
You cannot play chords.
4.
To cancel the Mix In function, press [MIX IN] once
again so its indicator goes out.
Selecting the input source device
1.
Press and hold [MIX IN].
The Mix In select sub window will appear.
2.
Press [F5 (Input Setting)].
The input setting screen will appear.
3.
Press [CURSOR (up/down)] to move the cursor to the
item that you want to set.
4.
Use [VALUE] or [INC/DEC] to make the desired
setting.
Adjusting the volume of the external
device
device
You can use the volume section’s [INPUT] knob to adjust the volume
of the external device.
of the external device.
*
[INPUT] cannot adjust the volume of a device connected to the digital
in connector. You will need to adjust the volume on the connected
external device.
in connector. You will need to adjust the volume on the connected
external device.
Parameter
Range
Explanation
Input Select
LINE IN L/R,
LINE IN L,
DIGITAL(OPT),
DIGITAL(CO-AX),
MICROPHONE
LINE IN L,
DIGITAL(OPT),
DIGITAL(CO-AX),
MICROPHONE
Input source of the external
input sound
input sound
LINE IN L/R:
INPUT jacks
L/R (stereo)
LINE IN L:
INPUT jack L
(mono)
DIGITAL(OPT):
Digital In-
put (Optical)
DIGITAL(CO-AX):
Digital
Input (Coaxial)
MICROPHONE:
INPUT
jack (mono, mic level)
Mix-In
OFF, ON,
VELOCITY PADS
VELOCITY PADS
Switches Mix In on/off
OFF:
External input sound
will not be used.
ON:
External input sound
will be mixed into the out-
put.
put.
VELOCITY PADS:
The ve-
locity pads can be used to
play scales using the exter-
nal input sound.
play scales using the exter-
nal input sound.
Ext Output
Asgn
(External
Output
Assign)
Asgn
(External
Output
Assign)
DRY, MFX1,
MFX2, COMP
MFX2, COMP
Output destination of the ex-
ternal input sound that is
mixed in
ternal input sound that is
mixed in
DRY:
Output to MIX OUT-
PUT jacks without passing
through effects
through effects
MFX1 (2):
Output through
multi-effects 1 (or 2)
COMP:
Output through
the compressor
Ext Level L
0–127
Volume level of the external
input sound (left channel)
input sound (left channel)
Ext Level R
0–127
Volume level of the external
input sound (right channel)
input sound (right channel)
Ext Reverb
Send Level
Send Level
0–127
Depth of reverb applied to
the external input sound
the external input sound
Set this to 0 if you don’t
want to apply reverb.
want to apply reverb.
MC-909_Ref_e.book 34 ページ ２００５年３月１日 火曜日 午後３時２９分