Roland MC-909 用户手册
88
Effects
Here you can apply special effects to the sound.
Effect on/off
Use the ON/OFF buttons of the Effects section to switch each effect
on/off.
on/off.
fig.4-01
[COMP]:
Compressor
[MFX 1]:
Multi-effects 1
[MFX 2]:
Multi-effects 2
[REVERB]:
Reverb
Effect settings
1.
In the top screen of each mode, press [F4 (Effects)].
2.
Press [F1]–[F5] to select an effect to adjust.
3.
Use [CURSOR] to select a parameter.
4.
Use [VALUE] or [INC/DEC] to make settings.
Effect connection (Effect Routing)
You can specify the connections independently for each pattern.
The way in which the direct sound is output (
2
) and the depth of
reverb (
3
) can be set independently for each part.
fig.4-02
[F1 (Routing)]
Specify the connections (routing) between
parts, effects, and output destinations.
parts, effects, and output destinations.
[F2 (Comp/EQ)]
Compressor settings.
[F3 (MFX 1)]
Multi-effects 1 settings.
[F4 (MFX 2)]
Multi-effects 2 settings.
[F5 (Reverb)]
Reverb settings.
Parameter
Range
Explanation
1.
Part Number
1–16, EXT
The part for which you are
making effect settings.
making effect settings.
EXT:
External input
2.
Part Output
Assign
Assign
DRY, MFX1,
MFX2,
COMP, DIR1,
DIR2, RHY
MFX2,
COMP, DIR1,
DIR2, RHY
How the original sound of
each part will be output
each part will be output
DRY:
Output to MIX OUT-
PUT jacks without passing
through effects
through effects
MFX1 (2):
Output through
multi-effects 1 (or 2)
COMP:
Output through the
compressor
DIR1 (2):
Output to the DI-
RECT 1 (or DIRECT 2) jacks
without passing through ef-
fects
without passing through ef-
fects
RHY:
Output according to
the settings of the rhythm
set assigned to the part
set assigned to the part
* “RHY” can be set only
when a rhythm set is as-
signed to the part.
signed to the part.
3.
Part Reverb
Send Level
Send Level
0–127
Depth of reverb applied to
each part
each part
Set this to 0 if you don’t
want to apply reverb.
want to apply reverb.
4.
Comp Output
Assign
Assign
(see explana-
tion)
tion)
Output destination of the
sound processed through the
compressor.
sound processed through the
compressor.
DRY:
MIX OUTPUT jacks
MFX1 (2):
Multi-effects 1
(or 2 )
5.
Comp Reverb
Send Level
Send Level
0–127
Depth of reverb applied to the
sound processed through the
compressor
sound processed through the
compressor
Set this to 0 if you don’t
want to apply reverb.
want to apply reverb.
6.
(MFX Type)
See “Multi-Ef-
fects List” (p.
92)
fects List” (p.
92)
The effect used by multi-ef-
fects 1
* For details on each effect,
fects 1
* For details on each effect,
refer to “Multi-Effects List”
(p. 92).
(p. 92).
1
2
3
4
5
6
7
8
9
10
11
MC-909_Ref_e.book 88 ページ ２００５年３月１日 火曜日 午後３時２９分