Roland V-Synth 用户手册

This effect reproduces the sound of an analog record played on a 
record player. This includes the various noises with the characteristic 
of records and the uneven rotation of older turntables.

fig.MFX-38

This effect reproduces the sound of an AM radio playing.

fig.MFX-39

PS Coarse

-12– +12 semi-
tone

Specifies the pitch shift amount 
in semitone steps.

PS Fine

-100– +100 cent

Adjusts the pitch shift amount in 
2-cent steps (1 cent = 1/100 of a 
semitone).

PS Balance

DRY100:0WET–
DRY0:100WET

Volume balance between the di-
rect sound (DRY) and the effect 
sound (WET)

Phaser Manual

0–127

Specifies the center frequency at 
which the sound is modulated.

Phaser Rate

0.05–10.0 Hz, 
note

Specifies the frequency of mod-
ulation.

Phaser Depth

0–127

Specifies the depth of modula-
tion.

Phaser Reso-
nance

0–127

Specifies the amount of feed-
back for the phaser.
Higher settings will give the 
sound a stronger character.

Phaser Mix Lev-
el

0–127

Specifies the volume of the 
phase-shifted sound, relative to 
the direct sound.

Delay Time

0–650 ms, note

Adjusts the delay time from the 
direct sound until the delay 
sound is heard.

Delay Feedback -98– +98 %

Adjusts the proportion of the de-
lay sound that is fed back into 
the effect. Negative (-) settings 
will invert the phase.

Low Damp Freq 50–4000 Hz

Adjusts the frequency below 
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps 
the low frequency band of the 
delay sound quicker than other 
bands, which makes for a clearer 
delay effect.

Low Damp 
Gain

-36–0 dB

Degree of Low Damp

Hi Damp Freq

2000–20000 Hz

Adjusts the frequency above 
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the 
higher frequencies first, makes 
the delay sound more natural.

Hi Damp Gain

-36–0 dB

Degree of High Damp

Delay Level

0–127

Volume of the delay sound.

L

R

Phonograph

Input Mode

MONO, STE-
REO

Use this setting to select either a 
stereo or monaural record play-
er for the effect.

Signal Dist

0–127

Degree of distortion

Frequency 
Range

0–127

Sets the frequency response of 
the record player.
Lowering the value degrades 
the frequency characteristics, 
making the sound resemble that 
from an older system.

Disk Type

LP, EP, SP

Sets the turntable rotation 
speed.
LP: 33 1/3 r.p.m.
EP: 45 r.p.m.
SP: 78 r.p.m.

Total Noise #1

0–127

Total noise level.

Scratch

0–127

Scratches on the record.

Dust

0–127

Dust on the record.

Hiss

0–127

Continuous hissing noise.

Total Wow/
Flutter #2

0–127

Total wow and flutter.

Wow

0–127

Wow, long cycle rotational ir-
regularity.

Flutter

0–127

Flutter, short cycle rotational ir-
regularity.

Random

0–127

Random rotational irregularity.

These settings determine the rotational irregularities of the record 
player. Set each of the Wow, Flutter, and Random levels to get a bal-
ance, the adjust the overall depth of the effect with the Total Wow/
Flutter control.
Balance

DRY100:0WET–
DRY0:100WET

Volume balance between the di-
rect sound (DRY) and the effect 
sound (WET)

Tuning #1

-50– +50

Adjusts the degree of noise that 
occurs when tuning a radio.

Noise Level #2

0–127

Sets the noise level.

Frequency 
Range #3

0–127

Sets the frequency response of 
the radio.
Lowering the value worsens the 
frequency characteristics, mak-
ing the sound appear to be com-
ing from a tiny radio speaker.

Balance

DRY100:0WET–
DRY0:100WET

Volume balance between the di-
rect sound (DRY) and the effect 
sound (WET)

L

R

Radio

Tuning