Roland KR7/5 用户手册
132
Chapter 6 Creating and Editing Songs
Chapter 6
Changing the Tempo of
Recorded Songs
Recorded Songs
You can change the basic tempo of a composition. The basic
tempo was initially set when the song was recorded.
tempo was initially set when the song was recorded.
1.
Press the Tempo [-] and [+] buttons to choose a tempo.
2.
Hold down the [
(Rec)] button and press the
[
(Reset)] button.
The song’s basic tempo changes.
The change in basic tempo is discarded when you turn
off the power or choose a different song. Save important
song data to floppy disks or to user memory (p. 106).
off the power or choose a different song. Save important
song data to floppy disks or to user memory (p. 106).
* If the song you’re working on has tempo changes, press the
[
(Reset)] button to go back to the beginning of the song
before you carry out this operation.
Changing the Tempo Within
the Song
the Song
You can add tempo changes to a recorded composition.
The KR-7/5 stores song tempo information and performance
data separately. Therefore, when making changes to the
tempo in a song, you must record the changes in the tempo
information independently of the performance data.
data separately. Therefore, when making changes to the
tempo in a song, you must record the changes in the tempo
information independently of the performance data.
This recording of the tempo is called “Tempo Recording.”
■
Adjusting the Tempo While
Listening to a Song
Listening to a Song
You can add ritardando and other such gradual tempo
changes.
changes.
Setting the Rec Mode to “Tempo”
1.
Press the [Menu] button.
The Menu screen appears.
2.
Touch <Rec Mode>.
A screen like the one shown below appears.
fig.d-rec-tempo.eps_50
3.
Touch the <Rec Mode>
to select <Tempo>.
This makes the setting for tempo recording.
Touch <Exit> a number of times to switch to the screen
where the measure number is indicated in the upper
right of the screen.
where the measure number is indicated in the upper
right of the screen.
When the KR-7/5 goes into Tempo Recording, the tempo
indication is highlighted in white.
indication is highlighted in white.
Recording the Tempo
4.
Use the [
(Bwd)] and [
(Fwd)] buttons to
move slightly before the measure where you want to
change the tempo.
5.
Press the [
(Rec)] button and watch the indicator is
flashing.
The KR-7/5 is put in recording standby.
6.
When you press the [
(Play/Stop)] button,
recording begins.
7.
When you get to the place where you want to change
the tempo, use the Tempo [-] and [+] buttons or the dial
to vary the tempo as desired.
8.
When you press the [
(Play/Stop)] button,
recording stops.
The song’s tempo changes.
* You cannot record performances while in Tempo Recording
mode. When you’re finished tempo recording, go back to the
ordinary Replace Recording. Take a look at “Changing the
Recording Method (Rec Mode)” (p. 120).
ordinary Replace Recording. Take a look at “Changing the
Recording Method (Rec Mode)” (p. 120).