Roland TD-6 用户手册

This adjusts the volume of the backing part (Parts 1–4).

Raising the value will increase the volume. With a setting of 
“0,” no sound is produced.

• This setting cannot be made in GM mode (p. 100).
• This volume setting is applied to all songs. Even when 

songs are switched, the setting does not change.

• The volume level of the drum kit part is adjusted in the 

“MasterVolume (Master Volume)” (KIT/COMMON/
MasterVolume; p. 68).

• Adjust the volume level of each part to correct the 

• Hold down [SHIFT] and press [SONG] to jump to this 

screen.

fig.03-005_50

Select the part that is to be muted when [PART MUTE] is 
pressed. [PART MUTE] lights while the muting is in effect.

Hold down [SHIFT] and press [PART MUTE] to jump to this 
screen.

• This setting remains in effect even when songs are 

switched and when the TD-6 is played using data from 
an external MIDI device.

• All percussion instruments in the Preset songs (except for 

Preset song #1 “DRUMS”) are recorded to the percussion 
parts.

• Note numbers for muted drum instruments are 

predetermined and cannot be changed. For more on 

• Performances using the TD-6 and pads are recorded as a 

drum kit part.

fig.03-006_50

Mutes only the drum instruments in the percussion part (the 
percussion instruments still sound). This is convenient when 
performing with Preset songs.

All percussion part instruments are muted.

Mutes the performance recorded to the drum kit part. This is 
convenient when you want to perform along with songs you 
have recorded yourself.

The individual parts are muted.

All Parts 1–4 are muted.

This tunes Parts 1–4 as a whole.

The reference pitch is 440.0 Hz.

Tuning of the drum kit part and percussion part instruments 
is not affected by this setting.

fig.03-007_50 (SETUP-GENERAL-MasterTune)