Roland Piano 用户手册
192
Disk-Related Functions (Disk Utility)
Modifying the Name of the Disk
This function changes the volume label that was assigned when the
disk was formatted.
disk was formatted.
It is not possible to modify the volume label of the master disks
of the Standard MIDI Files releases, etc. from Roland.
of the Standard MIDI Files releases, etc. from Roland.
1.
2.
Press [6 (Tools)].
The Select Command window appears.
3.
Press
or
to select “Change Volume Label,” and
then press [8 (Select)].
The Change Volume Label window appears.
fig.16-16_50
4.
Modify the volume label and press [8 (OK)].
The Change Volume Label window appears.
fig.16-17_50
5.
Press [8 (Execute)] to execute the operation.
Checking Files Recorded on Disk
If a disk is scratched, slightly bent or damaged in some way, song
data or sound data files on it will no longer be readable, and
functions such as quick play and chain play will be interrupted. To
avoid such problems, this function checks all the files on disk to see
whether they can be read correctly.
data or sound data files on it will no longer be readable, and
functions such as quick play and chain play will be interrupted. To
avoid such problems, this function checks all the files on disk to see
whether they can be read correctly.
1.
2.
Press [6 (Tools)].
The Select Command window appears.
3.
Press
or
to select “Check Floppy Disk,” and then
press [8 (Select)].
The Check Floppy Disk window appears.
fig.16-18_50
4.
Press [8 (Execute)] to execute the operation.
After the disk has been checked, a message of “Disk Read Error
!” will be displayed if there is a problem with the disk. For
details on the appropriate action, refer to
!” will be displayed if there is a problem with the disk. For
details on the appropriate action, refer to
“Error Messages”
(Sound/Parameter List).