Roland VS-1680 用户手册

Using the VS-1680 with a CD-R/CD-RW drive

+Verify

If this is turned “On,” verification will be performed to check

whether or not the data was saved correctly after the song

data has been backed up.

CD Speed

Select the speed at which the song data will be backed up to

the CD-RW disc

x2 (353 KBps)

: Backup at double speed (353 kilobytes per

second).

x1 (176 KBps)

: Backup at normal speed (176 kilobytes per

second). This will increase the reliability.

NOTE

Depending on the disc, it may not be possible to back up reliably to

a CD-R disc with a setting of “x2 (353 KBps).” In such cases,

select “x1 (176 KBps).” Also, if you insert a CD-RW disc into a

CD-RW drive, it will not be possible to select “x1 (176 KBps)”

(backup will occur at double speed).

7. If two or more drives are connected, you can press

[F5 (SelDr)] to see a list of the drives. After checking the

list of drives, press [F1 (Back)].

fig.5-09_70

8. Press [F4 (Exec)]. A message will ask you to confirm.

fig.5-10

9. Press [YES]. The display will ask “STORE Current?”

(store the current song?)

10. If you wish to save the current song, press [YES]. If not,

press [NO]. If a protected song (such as a demo song) is

selected, press [NO].

11. If the amount of song data is too large to back up onto a

single CD-RW disc, the CD-RW disc will be ejected, and

you will be prompted to “Insert Disc #” (where # is

number of each disc in the series), so that the VS-1680 can

verify the number of discs that will be required. Insert

the next CD-RW disc, and press [YES]. At this time, we

recommend that you use a soft-tipped felt marker pen to

write the disc number on the disc label so that you can

remember the sequence in which each disc should be

inserted.

fig.5-11

12. If the backup extends over two or more discs, the display

will prompt you to “Insert Disc #.” Insert each disc once

again in the correct sequence, and press [YES]. Then,

backup will begin.

13. When the CD-R backup ends, you are returned to Play

condition.

Restoring songs from a
CD-RW disc (Recover)

Specifying the speed of
recovery (Speed)

Now you can specify the speed at which the data will be read

when recovering a song from a CD-RW disc.

Recovery procedure

1. Select the loading destination (recovery destination)

drive as the current drive.

2. Insert the CD-RW disc that contains the song backup into

the drive.

3. Press [PLAY (DISPLAY)].

4. Hold down [SHIFT] and press [F6 (UTILITY)].