Roland VS-1680 用户手册

Mix 16 tracks down to 2 tracks (Mastering Room)

12. Use the cursor buttons and the Value dial to change the 

"Status" of the tracks for mastering to “Rec.”

13. Press [REC]. The REC indicator will light in red.

14. Press [PLAY]. The PLAY indicator will light in green, 

and recording will begin.

15. When you finish recording, press [STOP].

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

fig.2-08

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

The “Status” of the assigned mastering tracks/V-tracks can 

also be set as follows.

1. Press [MASTER].

2. Press [PAGE] so that [F6] indicates “M.Tr,” and then 

press [F6 (M.Tr)].

fig.2-03

3. Select the status of the mastering tracks. Make sure that 

the cursor is located at “Stat,” and then rotate the 

TIME/VALUE dial.

fig.2-10

4. Select the V-tracks. Use [

] or [

] to move the 

cursor to “L:” or “R:,” and rotate the TIME/VALUE dial.

The “Status” of the mastering tracks can also be set as 

follows.

1. Press [PLAY (DISPLAY)].

2. Press [PAGE] so that [F6] indicates “M

→

***” (*** is either 

Rec, Ply, or Off).

fig.2-11

3. Press [F6] to cycle between “M

→

Rec” 

→

 “M

→

Play” 

→

 

“M

→

Off.” The current status of the mastering tracks will 

be shown by the level meters in the display.

fig.2-12.e

Here’s how you can verify the audio that was mixed down to 

the mastering tracks. 

1. Press [PLAY (DISPLAY)].

2. Press [PAGE] so that [F6] indicates “M

→

***” (*** is either 

Rec, Ply, or Off).

TR1

MASTER

MIX

Sw

MIX

L

R

Track 1--16

TR15-16

TR16-16

Mastering

Track

MASTER OUT
MONITOR OUT

Off

Record wait Status

Playback Status