Roland KR107 用户手册
149
Chapter 9 Various Settings
Chapter9
■
Restoring the Factory Settings
(Factory Reset)
(Factory Reset)
You can return the content stored with “Memory Backup” (p.
148) and the User Programs (p. 108) to their original factory
settings. This operation is referred to as “Factory Reset.”
148) and the User Programs (p. 108) to their original factory
settings. This operation is referred to as “Factory Reset.”
NOTE
When you perform a Factory Reset, all settings that have been
stored in memory up to then are erased and reset to their
factory defaults.
This operation does not return the touch screen
calibration settings to the original factory condition. To
return the touch screen calibration settings to the
original factory settings, refer to “Returning the Touch
Screen Calibration Settings to the Original Factory
Settings” (p. 151)
calibration settings to the original factory condition. To
return the touch screen calibration settings to the
original factory settings, refer to “Returning the Touch
Screen Calibration Settings to the Original Factory
Settings” (p. 151)
When you want to restore the content registered to the
KR’s User memory to the factory condition, refer to
“Formatting the User Memory” (p. 152).
KR’s User memory to the factory condition, refer to
“Formatting the User Memory” (p. 152).
A screen like the one shown below appears.
fig.d-factory.eps_50
Touch <Execute>.
The confirmation message appears on screen.
Touch <OK> to restore the original factory settings.
When you have finished making the settings, switch off the
power, then switch it back on again.
power, then switch it back on again.
When you touch <Cancel>, the settings are left untouched,
and you’re returned to the previous screen.
and you’re returned to the previous screen.
NOTE
Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s internal
memory, making it unusable.
■
Changing the Functions of the
Remote Control’s Buttons
Remote Control’s Buttons
You can change the functions assigned to the remote
control’s buttons.
control’s buttons.
At step 3 in “Procedure” (p. 142), touch <Remocon Setting>.
A screen like the one shown below appears.
A screen like the one shown below appears.
Changing the [
] (PLAY) Button Functions
1.
Touch <PLAY>
to assign functions to
[
] (PLAY) button.
2.
Press the [Exit] button to return to the Functions screen.
Display
Explanation
All Song
Play
Play
Songs are played back continuously in
sequence, starting from the currently
selected song.
sequence, starting from the currently
selected song.
Internal Song
Songs in the selected genre are played
back continuously.
back continuously.
“Favorites” Songs
Songs registered to the “Favorites” are
played back in sequence.
played back in sequence.
Songs on External Memories and
Floppy Disks
Floppy Disks
Songs within the selected folder are
played back continuously.
played back continuously.
One Song
Play
Play
Only the selected song is played back.
Playback stops when the song is finished.
Playback stops when the song is finished.
Random
Play
Play
The songs are played back in random
order.
order.
Internal Song
The songs in all genres are played back in
random order.
random order.
“Favorites” Songs
Songs registered to the “Favorites” are
played back in random order.
played back in random order.
Songs on External Memories and
Floppy Disks
Floppy Disks
Songs within the selected folder are
played back in random order.
played back in random order.
KR107_e.book 149 ページ ２００５年８月３日 水曜日 午前９時３６分