Roland KR107 用户手册
160
Chapter 10 Connecting External Devices
Chapter 10
Connecting MIDI Devices
By connecting an external MIDI device and exchanging
performance data, you can control one device from the other.
For instance, you can output sound from the other
instrument or switch Tones on the other instrument.
performance data, you can control one device from the other.
For instance, you can output sound from the other
instrument or switch Tones on the other instrument.
What’s MIDI?
MIDI, short for “Musical Instrument Digital Interface,” was
developed as a universal standard for the exchange of
performance data between electronic instruments and
computers.
developed as a universal standard for the exchange of
performance data between electronic instruments and
computers.
The KR is equipped with MIDI connectors to let it exchange
performance data with external devices. These connectors
can be used to connect the KR to an external device for even
greater versatility.
performance data with external devices. These connectors
can be used to connect the KR to an external device for even
greater versatility.
984
* A separate publication titled “MIDI Implementation” is also
available. It provides complete details concerning the way
MIDI has been implemented on this unit. If you should require
this publication (such as when you intend to carry out byte-
level programming), please contact the nearest Roland Service
Center or authorized Roland distributor.
MIDI has been implemented on this unit. If you should require
this publication (such as when you intend to carry out byte-
level programming), please contact the nearest Roland Service
Center or authorized Roland distributor.
■
Connectors
fig.09-
MIDI Out Connector
Connect this to the MIDI In connector on an external MIDI
device using a MIDI cable (sold separately).
device using a MIDI cable (sold separately).
Performance data when you play the keyboard or depress a
pedal is sent from this connector to the external MIDI
connector.
pedal is sent from this connector to the external MIDI
connector.
MIDI In Connector
Connect this to the MIDI Out connector on an external MIDI
device using a MIDI cable (sold separately).
device using a MIDI cable (sold separately).
This receives MIDI messages that are sent from external
MIDI devices. The KR receiving MIDI messages can output
sounds, exchange tones and perform other operations.
MIDI devices. The KR receiving MIDI messages can output
sounds, exchange tones and perform other operations.
* External MIDI devices can’t be used for remotely changing the
Tones played by the KR’s keyboard.
■
Making the Connections
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
on all devices before making any connections.
1.
Turn the volume all the way down on the KR and on
the device you’re about to connect.
2.
Switch off the power to the KR and the device you’re
about to connect.
3.
Use a MIDI cable (sold separately) to connect the MIDI
connectors to each other.
Please refer to the connection examples below.
4.
Switch on the power to the KR and the connected
device.
5.
Adjust the volume level on the KR and the connected
device.
6.
You should also set the MIDI settings as needed.
For details on the MIDI-related settings, refer to
p. 161–p. 163.
p. 161–p. 163.
Connection Examples:
Setup with a MIDI Sequencer
fig.09-10
* When the KR is connected to a MIDI sequencer, set it to Local
Connecting with a MIDI Sound Module
fig.09-
In
Out
MIDI
Roland MT Series
KR107
OUT
THRU
IN
MIDI
Sound Module
KR107
KR107_e.book 160 ページ ２００５年８月３日 水曜日 午前９時３６分