Roland XV-5080. 用户手册
110
Chapter 3 Selecting Output Jacks
Example of Settings
Assigning Different Output
Destinations for the Tones in a Patch
Destinations for the Tones in a Patch
In this example, let’s suppose we have a Patch composed of
four Tones, and we are outputting Tone 1 from the A
OUTPUT jacks, Tone 2 from the B OUTPUT jacks, Tone 3
from the INDIVIDUAL 5 jack, and Tone 4 from the
INDIVIDUAL 6 jack. The Chorus and Reverb are output
from the B OUTPUT jacks.
four Tones, and we are outputting Tone 1 from the A
OUTPUT jacks, Tone 2 from the B OUTPUT jacks, Tone 3
from the INDIVIDUAL 5 jack, and Tone 4 from the
INDIVIDUAL 6 jack. The Chorus and Reverb are output
from the B OUTPUT jacks.
First, set the output destination for each Tone.
1. Select the Patch you wish to set.
2. Press [F6 (Effects)].
3. Press [F1 (General)] to call up the PATCH Effects General
page.
4. Use TONE SELECT [1]–[4] to select the Tone you wish to
set up.
5. Press [
]/[
]/[
]/[
] to move the cursor to
the parameter you wish to set, and rotate the VALUE
dial, or press [INC] or [DEC] to set the value as follows.
dial, or press [INC] or [DEC] to set the value as follows.
Tone Output Tone Dry
Tone Chorus Tone Reverb
Assign
Send Level
Send Level
Send Level
Tone 1
A
127
100
100
Tone 2
B
127
100
100
Tone 3
5
127
100
100
Tone 4
6
127
100
100
The Chorus and Reverb send levels can be set to any value
you wish other than 0.
you wish other than 0.
6. Press [EXIT] to return to the PATCH PLAY page.
7. Press [F1 (Common)].
8. Press [
]/[
] to move the cursor to Output Assign.
9. Turn the VALUE dial or press [INC]/[DEC] to select
“TONE.”
10. Press [EXIT] to return to the PATCH PLAY page.
Next, select the Chorus output destination and set its overall
level.
level.
11. Press [F6 (Effects)].
12. Press [
]/[
]/[
]/[
] to move the cursor to
Chorus Output Assign.
13. Turn the VALUE dial or press [INC]/[DEC] to select “B.”
14. Press [
]/[
]/[
]/[
] to move the cursor to
Chorus Level.
15. Turn the VALUE dial to select “100.”
16. Press [
]/[
] to move the cursor to Chorus Output
Select.
17. Turn the VALUE dial or press [INC]/[DEC] to select
“MAIN.”
Finally, select the Reverb output destination and set its
overall level.
overall level.
18. Press [
]/[
]/[
]/[
] to move the cursor to
Reverb Output Assign.
19. Turn the VALUE dial or press [INC]/[DEC] to select “B.”
20. Press [
]/[
]/[
]/[
] to move the cursor to
Reverb Level.
21. Turn the VALUE dial to select “100.”
22. Press [EXIT] to return to the PATCH PLAY page.