Roland XV-5080. 用户手册

fig.0-001

This adjusts the volume from the A (MIX) OUTPUT jacks and 
PHONES jacks. The volume from the OUTPUT B, C and D jacks 
cannot be adjusted.

You can press the knob to listen to the XV-5080 without using 
any external devices. (Phrase Preview function; p. 16)

Headphones are plugged in here. (Quick Start; p. 11)

The display presents a variety of information about the 
operation being performed.

The screen displayed switches each time the button is pressed, 
rotating through the System mode, Utility mode, and original 
screens.

 (the indicator is lit)

This allows you to make settings that affect the entire XV-5080.

 (the indicator is blinking)

This allows you to perform operations such as saving, copying, 
initializing, transferring data, write-protecting data, and factory 
reset operations.

The functions of these buttons change depending on the selected 
page.

The function name is shown in the display.

When “

” appears next to the function name in the lower row 

of the screen, it means that there are one or more further pages. 
Press the corresponding [F1]-[F6] buttons to switch to such 
pages.

Press this button when you wish to return to the basic display, or 
to cancel an operation before executing it.

Hold [EXIT] and press [

] to hear the demo songs. (Quick 

Start; p. 14)

Use this to modify the values of a setting. If you hold down 
[SHIFT] as you turn the VALUE dial, the parameter’s value will 
change by larger increments.

Press this dial in Patch/Rhythm Set mode to display a list 
showing the collection of your favorite sounds. (p. 207)

Pressing the VALUE dial while “

” appears in the upper right 

of the screen displays the list for the screen.

You can select a Patch using the Patch Finder function. (p. 19)

Use these to modify the values of a setting. If you keep on holding 
down one button while pressing the other, the value change 
accelerates. If you press one of these buttons while holding down 
[SHIFT], the value will change in bigger increments.

Use these buttons to move the cursor.