Roland XV-5080. 用户手册
178
Chapter 6 Creating Rhythm Sets
V-Curve (TVA Level Velocity Curve)
Range:
FIXED/1–7
This setting allows you to select from seven velocity curves
that determine how the force with which the keyboard is
played is to affect the Tone’s volume. The selected curve is
displayed to the below of its parameter value.
that determine how the force with which the keyboard is
played is to affect the Tone’s volume. The selected curve is
displayed to the below of its parameter value.
When set to “FIXED,” the Tone’s volume will not be affected
by the force with which the keyboard is played.
by the force with which the keyboard is played.
V-Sens (TVA Level Velocity Sens)
Range:
-63– +63
Use this setting when you want keyboard touch (velocity) to
affect the Tone volume. Set this to a positive value to have
the changes in tone volume increase the more forcefully the
keys are played; to make the Tone play more softly as you
play harder, set this to a negative value.
affect the Tone volume. Set this to a positive value to have
the changes in tone volume increase the more forcefully the
keys are played; to make the Tone play more softly as you
play harder, set this to a negative value.
Pan
Pan (Tone Pan)
Range:
L64–63R
Specifies the stereo position of the Tone. L64 is far left, 0 is
center, and 63R is far right.
center, and 63R is far right.
Random (Random Pan Depth)
Range:
0–63
Use this parameter to activate random panning, note-by-
note. Higher values will result in a greater width of change.
note. Higher values will result in a greater width of change.
Alternate (Alternate Pan Depth)
Range:
L63–63R
This setting causes panning to be alternated between left and
right each time a key is pressed. Higher values will result in a
greater width of change. You can select the stereo placement
of the first key using this parameter – its opposite will be
used for the second note, and so on back and forth. If you
want to alternate the pan position of two Tones, set them to
the exact opposite L and R settings.
right each time a key is pressed. Higher values will result in a
greater width of change. You can select the stereo placement
of the first key using this parameter – its opposite will be
used for the second note, and so on back and forth. If you
want to alternate the pan position of two Tones, set them to
the exact opposite L and R settings.
RHYTHM TVA Envelope page
([RHYTHM] - [F4 (Key TVA)] - [F2 (TVA
Env)])
([RHYTHM] - [F4 (Key TVA)] - [F2 (TVA
Env)])
fig.06-018.e_70
TVA Envelope
Time 1–4 (TVA Envelope Time 1–4)
Range:
0–127
These settings determine the times over which the Tone level
setting will change from one TVA envelope level to the next.
setting will change from one TVA envelope level to the next.
Level 1–3 (TVA Envelope Level 1–3)
Range:
0–127
Each TVA envelope level value determines an amount of
change to be applied to the original Rhythm Tone level
setting.
change to be applied to the original Rhythm Tone level
setting.
Velocity Sens
Time1 (TVA Envelope Time 1 Velocity
Sensitivity)
Sensitivity)
Range:
-63– +63
Use this parameter when you want keyboard playing
dynamics (velocity) to affect T1 (Time 1) of the TVA
envelope. For higher settings, there will be a greater
difference between softly and strongly played notes. With
positive (+) settings, greater keyboard velocity will reduce
the T1 setting. With negative (-) settings, greater keyboard
velocity will increase the T1 setting.
dynamics (velocity) to affect T1 (Time 1) of the TVA
envelope. For higher settings, there will be a greater
difference between softly and strongly played notes. With
positive (+) settings, greater keyboard velocity will reduce
the T1 setting. With negative (-) settings, greater keyboard
velocity will increase the T1 setting.
Time4 (TVA Envelope Time 4 Velocity
Sensitivity)
Sensitivity)
Range:
-63– +63
Use this parameter when you want keyboard playing
dynamics (velocity) to affect T4 (Time 4) of the TVA
envelope. With higher settings, the T4 value will change
more significantly depending on whether you release the key
slowly or quickly. With positive (+) settings, greater
keyboard velocity will reduce the T4 setting. With negative (-
) settings, greater keyboard velocity will increase the T4
setting.
dynamics (velocity) to affect T4 (Time 4) of the TVA
envelope. With higher settings, the T4 value will change
more significantly depending on whether you release the key
slowly or quickly. With positive (+) settings, greater
keyboard velocity will reduce the T4 setting. With negative (-
) settings, greater keyboard velocity will increase the T4
setting.
fig.06-019.e
T1
T2
T3
T4
L3
L1
L2
Level
key is pressed
key is released
Time