Roland XV-5080. 用户手册

You can apply Multi-effects, Chorus or Reverb to each of a 
Rhythm Set’s Tones. You can control the amount of effect to 
be applied to each Rhythm Tone by adjusting its send level to 
the Multi-effects, Chorus and Reverb.

fig.02-022.e

The primary role of the effect settings is to determine the 
Rhythm Tone Output Assign.

You can select from the following Rhythm Tone Output 
Assign settings values to suit your purposes.

 Selected when Multi-effects, chorus, and reverb are 

used.

 Selected when outputting in stereo without use of the 

Multi-effects. Chorus and reverb can be used.

 Selected when outputting in mono without Multi-

effects. Chorus and reverb can be used. When this setting is 
used, chorus and reverb sounds are output in stereo 
according to the Chorus Output Assign and Reverb Output 
Assign settings.

The screen appears as shown below, according to the settings 
values.

• For MFX

fig.02-023.e_70

• For A–D

fig.02-024.e_70

• For 1–8

fig.02-025.e_70

1. Select the Rhythm Tone you wish to set.

2. Press [F6 (Effects)].

The Patch Effect page appears.

3. Press [F1 (General)].

The General page will appear.

fig.02-026.e_70

4. Press [

]/[

]/[

]/[

] to move the cursor to 

the parameter you want to set.

5. Turn the VALUE dial or press [INC]/[DEC] to select the 

desired value.

6. Repeat Steps 3 to 5 to set the Effect.

7. Press [EXIT] to return to the RHYTHM Play page.

A “*” symbol will appear at the left of the Rhythm Set name, 
indicating that its settings have been modified.

fig.02-027.e_70