Roland RD-700 用户手册

 

Up to two optional wave expansion boards (SRX series) can be installed into 
the RD-700.

Use the following procedure when selecting tones stored on an wave 
expansion board.

 

fig.panel

 

Press ONE TOUCH [PIANO].

 

This selects a single tone to be played over the entire keyboard.

 

Press EXPANSION [A] or [B] to make its indicator light.

 

fig.LCD

 

If you hold down 

 

EXPANSION [A] or [B] for several seconds, the 

name of the installed wave expansion board appears in the 
display (

 

 

).

 

Press [NUM LOCK] to turn on the button indicator.

 

Press [INC/YES] or [DEC/NO], or press the TONE SELECT 
buttons to select the Tone.

 

When using the TONE SELECT buttons to input Tone numbers, press 
[ENTER] afterwards to set the number.

 

Play the keyboard, and you will hear the selected tone.

For instructions on 
installing the Expansion 
Board, refer to “Installing 
the Wave Expansion 

CONTROL

For details on the Tone list 
for Wave Expansion Board, 
refer to the “Patch List” 
and the “Rhythm Set List” 
of the owner’s manual for 
the SRX Series.

When changing tones in 
Layer or Split mode, select 
the part for which the tone 
is to be changed with the 
PART SELECT buttons, 
without pressing the ONE 
TOUCH [PIANO] button. 
For details, refer to 
“Changing Tones in 

RD-700_e.book 39 ページ ２００４年４月２６日　月曜日　午前１１時５４分