Roland Studio Package Pro 用户手册

■

When you press the [EQ/SEND] button so it lights in red, you can control the 4-band EQ and Aux 
send levels of the track/bus selected by CH SELECT.
PAN knobs 1–8:

EQ band #1–4 gain and freq. (Except MIDI track was selected.)

PAN knobs 9–12:

Aux 1-4 send level. (Only audio track was selected.)

EQ buttons 1-4:

EQ band #1–4 on/off

EQ are already assigned in the Cakewalk Normal template (Track 1-12). You need to 
assign EQ manually, when using other tracks or templates.

■

When you press the [PLUG-IN] button so it lights in red, you can control DirectX 8 compatible 
plug-in parameters for the track/bus selected by CH SELECT.
PAN knobs 1–10:

Parameter 1-10 of plug-in selected by EQ buttons 1-4.

PAN knobs 11:

Bypass on/off of plug-in selected by EQ buttons 1-4.

EQ button 1–4:

Select plug-in 1-4.

The plug-in parameters to which the SI-24’s knobs 1–10 correspond will depend on 
the plug-in.

■

When you press the [LOCATE] button so it lights in red, the [Num Pad 1–0] buttons will have the 
following functions.
[1]:

Specify the Now time as the time from which a selection extends. 

[2]:

Specify the Now time as the time through which a selection extends. 

[3]:

Set loop to selection.

[4]:

Loop on/off.

[5]:

Set the Now time to the end of the project.

[6]:

Set the Now time to the From time.

[7]:

Set the Now time to the Thru time.

[8]:

Set the Now time to the previous marker.

[9]:

Set the Now time to the next marker.

[0]:

Insert a marker at the Now time (during playback) or a specified location.