Roland PCR-50 用户手册

Edit mode (EDIT)

Advanced mode 1 of PROGRAM CHANGE ASSIGN lets you specify the upper and lower limits of the 
program change value. Advanced mode 2 lets you transmit BANK LSB/MSB settings in addition to 
the program change.

1. Press the 

 button.

2. Slightly move the controller to which you want 

to assign a Program Change message. In the 
case of a button, press that button. The display 
will indicate the number of the selected 
controller.

3. Confirm what’s indicated, and press the 

 button.

4. Press the 

 key and then 

press key 

.

5. Press the 

 button.

6. Input the channel.

7. Press the 

 button.

8. The following display will appear.

fig.max

*1 Reference

9. Use the 

 buttons or the 

–

 keys 

to specify the upper value limit.

10. Press the 

 button.

11. The following display will appear.

fig.min

*1 Reference

12. Use the 

 buttons or the 

–

 keys 

to specify the lower value limit.

13. Press the 

 button.

4. Press the 

 key and then 

press key 

.

5. Press the 

 button.

6. Input the channel.

7. Press the 

 button.

8. Specify the bank select MSB (CC#00). Use the 

 buttons or the 

–

 keys to 

specify the MSB.

fig.BANK-2

*1 Reference

9. Press the 

 button.

10. Specify the bank select LSB (CC#32). Use the 

 buttons or the 

–

 keys to 

specify the LSB.

fig.BANK-3

*1 Reference

11. Press the 

 button.

12. Input the program change number.

13. Press the 

 button.

14. The display will indicate “P--”.

fig.p1

*1 Reference

15. Specify the output port. (➔

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or 

mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently 

set value, or will blink if the value is different.