Roland PCR-50 用户手册

Edit mode (EDIT)

13. To specify “2” for the upper bits, press the 

 key.

The display will indicate “2BL”.

14. Confirm what’s indicated and press 

.

15. In the same way, enter bytes 8.

16. Since the ninth byte is the data area, press the 

 key.

The display will indicate “DT0.”

17. Confirm what’s indicated and press 

.

18. Since the ten byte will contain the checksum, press the 

 key to specify the location at which the 

checksum will be input.
The display will blink “CS1” (Checksum Type 1).

19. Confirm what’s indicated and press 

.

20. Press the 

 and then 

 keys to input the ending status “F7.”

21. Confirm what’s indicated and press 

.

22. Next, specify an upper limit value of “58” for the data area.

23. Press 

.

24. Specify a lower limit value of “40” for the data area.

25. Press 

.

26. Specify the output port. 

(➔

27. If you are making an assignment for a button, specify the button mode. (➔

The GS Bend Pitch Control message has been assigned.