Roland TD-20K 用户手册
15
Assemble the TD-20K
Using the built-in connection cables of the MDS-20, connect the pads, cymbals, hi-hat, kick trigger pad, and percussion sound
module.
module.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
on all devices before making any connections.
fig.25.e
•
The HI-HAT and RIDE cymbal use two cables each.
•
After the VH-12 is connected to the TD-20 percussion sound module, the offset must be adjusted
.
• Use trigger inputs AUX1-AUX4 when adding new pads.
* Do not pull or stretch the cables too tight.
T1
T2
T3
T4
PD-125
PD-125
PD-125
RD
(BOW/BELL)
RDE
(BOW/EDGE)
CY-14C
CY-14C
CY-14C
CY-14C
CY-15R
CY-15R
CR1
(BOW/EDGE)
CR2
(BOW/EDGE)
KIK
KD-120
SNR
PD-105
PD-105
TD-20
HH
(TRIGGER OUT)
HHC
(CTRL OUT)
VH-12
VH-12
KIK
SNR
T1
T2
T3
T4
HH
HHC
CR1
CR2
RD
RDE
AX1
AX2
AX3
AX4
TD-20 Rear Panel
* When connecting the cables, please refer to the marking labels that are attached to both ends of the cables.
TD-20K_e.book 15 ページ 2006年12月7日 木曜日 午前9時24分