Roland PCR-80 用户手册

Installing & Setting Up the Driver (Windows)

Click the Windows 

 button. From the menu that appears, select 

.

Open the 

 dialog box.

fig.2-14_40

In the dialog box that appears, 
input the following into the 

 field, and click 

.

The 

 dialog box will appear.

You are now ready to install the driver.

Use the 

 to connect the 

 to your 

.

1. With the power switch turned 

, connect the 

 to the 

.

2. Connect the 

 to an electrical outlet.

3. Use the 

 to connect the 

 to your 

.

Set the PCR-30/50/80’s 

 to the 

 position.

Once the connections have 
been completed, turn on 
power to your various 
devices in the order 
specified. By turning on 
devices in the wrong 
order, you risk causing 
malfunction and/or 
damage to speakers and 
other devices.

This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.

If the 

 setting was not set to 

, a 

 dialog box will appear.

Click 

.

Continue the installation.

Click 

.

When the 

 appears, click 

.

Perform the installation as described in the 

 section on