Roland TD-6V 用户手册

下载
页码 148
 
100
 
Chapter 7 Making the MIDI Settings (SETUP/MIDI, BULK DUMP)
 
While in GM mode, “
” appears in the drum kit screen.
 
fig.07-015aai
fig.07-015_50
 
GM Mode: OFF, ON
 
Preventing the TD-6V from 
Switching to GM (General MIDI) 
Mode 
(Rx GM ON)
 
This setting prevents the TD-6V from switching to GM mode, 
even when a “GM System ON message” is received from an 
external MIDI device.
 
fig.07-016_50
 
RX GM ON: OFF, ON
 
OFF:
 
Even when a “GM System ON message” is received, the TD-
6V does not switch to GM mode. If you wish to switch to GM 
mode, follow the procedures described on foregoing 
paragraph to switch manually.
 
ON:
 
When a “GM System ON message” is received, the TD-6V 
switches to GM mode.
 
Mixing MIDI Signals Coming to the 
MIDI IN with Real Time Performance 
on the Pads (Soft Thru)
 
This setting causes data (except for System Exclusive 
messages) received at MIDI IN to be output from the MIDI 
OUT/THRU connector along with the pad and sequencer 
performance data.
 
fig.07-016a.e
 
If this setting is not used, leave it “OFF” as the trigger 
response of the pads will be faster.
 
fig.07-017_50
 
Soft Thru: OFF, ON
 
OFF:
 
Only pad and sequencer performance data is output from the 
MIDI OUT/THRU connector.
 
ON:
 
Data received at MIDI IN is output together with the pad and 
sequencer performance data from the MIDI OUT/THRU 
connector.
GM System On Message
This is a message which switches a device to an operating 
mode that is compatible with the GM system, or to 
initialize a sound generator so that it will be compatible 
with the GM system.
When “RX GM ON” is set to “OFF,” the GM System ON 
message is ignored.
External MIDI Sequencer
TD-6V
Pad
Soft Thru: ON
MIDI Compatible Pad
OUT/THRU
OUT
IN
Trigger
Input
TD-6KV_e.book 100 ページ 2005年1月24日 月曜日 午後7時4分