Roland TD-6V 用户手册
106
Chapter 8 Features Using MIDI and Setting Examples
Combining with an External
MIDI Sequencer
Importing Sequence Data from an
External MIDI Device to the TD-6V’s
Internal Sequencer
You can load data created on another sequencer from the
MIDI IN connector and record the data on the TD-6V’s
sequencer, then use the data as a song. The backing part (Parts
1–4), percussion part, and drum kit part can be imported
simultaneously.
MIDI IN connector and record the data on the TD-6V’s
sequencer, then use the data as a song. The backing part (Parts
1–4), percussion part, and drum kit part can be imported
simultaneously.
When TD-6V’s instruments are changed from an external
MIDI device, the change is not recorded by the TD-6V’s
sequencer. Use the TD-6V to make each part’s instrument
settings.
MIDI device, the change is not recorded by the TD-6V’s
sequencer. Use the TD-6V to make each part’s instrument
settings.
For more on external MIDI device operations, refer to the
owner’s manuals for the devices you are using.
owner’s manuals for the devices you are using.
1.
Use a MIDI cable to connect the MIDI IN
connector of the TD-6V to the MIDI OUT
connector of the external MIDI device.
fig.08-002.e
2.
Match the MIDI channel to be used for
transmitting data from the external MIDI device
and the MIDI channel that the TD-6V will use for
receiving the data.
3.
Set “CH10Priorty (Channel 10 Priority)” as
needed when recording drum and percussion
performances.
4.
Set “Sync Mode” to “EXT” in order to
synchronize the TD-6V to the external
sequencer. (SETUP/MIDI COMMON/Sync Mode)
5.
You can select a new User song by holding down [SHIFT]
and pressing [STOP
] while in the Song screen.
New User songs are indicated by “
” in the display.
6.
Make the settings for the TD-6V’s parts.
Specify the part instruments and percussion sets, volume
levels, etc.
levels, etc.
7.
Press [REC
], then make the recording
Time Sig:
Set the beat (time signature) to comply with
that of the loaded data.
Rec Mode:
Set this to “REPLACE.”
8.
Start playback of the external MIDI device.
The TD-6V automatically begins recording.
9.
When you have finished recording, stop the
recording of the external MIDI device.
The TD-6V stops recording automatically.
Recording Your Performance to an
External Sequencer
This makes the settings that allow performances of the pads to
be recorded by an external MIDI sequencer.
be recorded by an external MIDI sequencer.
1.
Use a MIDI cable to connect the TD-6V and MIDI
sequencer MIDI connectors as shown in the
following figure.
fig.08-003.e
2.
Set Local Control to “OFF.”
MIDI OUT
MIDI IN
TD-6V
External MIDI Sequencer
TD-6V
OUT
OUT
IN
IN
External MIDI Sequencer
TD-6KV_e.book 106 ページ 2005年1月24日 月曜日 午後7時4分