Roland TD-6V 用户手册

 

This section outlines points to check if you experience 
problems, and what to do about them.

 

➝

 

Rotate the [VOLUME] knob to be sure.

 

➝

 

Local Control should be set to “ON” if an external 

sequencer is not being used.

 

➝

 

Press [+] or [-] to set the volume.

 

➝

 

Strike the pad that is not producing sound to switch to the 

pad’s settings screen. Press [+] or [-] to set the volume.

 

➝

 

Make sure that the pad connections are correct, and that 

each pad is connected to the proper input.

 

➝

 

Use only the provided cables to connect the pads.

 

➝

 

#1024 (OFF) is a setting used to prevent any sounds from 

being played. Select an instrument numbered 1–1,023.

 

➝

 

When using the PD-80R, PD-85, PD-105, PD-120 or PD-125 

to play rim shots, connect to Trigger Input 2 (SNARE).

 

➝

 

When using the PD-7, PD-8, PD-9, CY-6, CY-8, CY-12H, 

CY-12R/C, CY-14C, or CY-15R to play rim shots (or edge/

bell shots) or choking, connect to Trigger Input 2 (SNARE), 

3 (HI-HAT), 4 (TOM1), 9 (CRASH1), 10 (CRASH2), or 11 

(RIDE).

 

➝

 

The PD-6, PD-80, PD-100 and RP-2 are not capable of 

producing rim shots.

 

➝

 

Press [+] or [-] to make the setting.

 

You need to set the “Rim Sens” when using the PD-80R, 
PD-85, PD-105, PD-120 or PD-125 to play rim shots.

TD-6KV_e.book 110 ページ ２００５年１月２４日　月曜日　午後７時４分