Roland TD-6V 用户手册

 

Select a percussion set for the percussion part and instruments 
for Parts 1–4.

 

The TD-6V features ten Preset percussion sets that are ready to 
use.

 

You cannot change the content of the Preset percussion sets.

 

To see which percussion sets can be selected here, refer to the 
“Preset Percussion Set List” (p. 124).

 

A collection of a number of percussion instruments. A 
different percussion instrument is assigned to each note 
number, so multiple instruments can be used at one time.

 

fig.05-025ai.e

 

You can select all internal tones in sequence, including 
variation tones.

You can switch instrument groups for the backing instruments 
by holding down [SHIFT] and pressing [+] or [-].

 

To see which backing instruments and instrument groups can 
be selected here, refer to the “Backing Instrument List” (p. 
126).

 

Instrument numbers correspond to the program numbers (1–
128).

 

This is a type of tone that varies slightly from that of the 
instrument number. The number of variation tones varies 
with the instrument number.

 

fig.05-024ai.e

 

Specifies the volume at each point. Raising the value will 
increase the volume. With a setting of “0,” no sound is 
produced.

Adjust here to balance the volume levels of the different parts.

 

fig.05-026_50

Percussion Set Number

Percussion Set Name

Display When a Variation 
Tone is Used

Instrument Number

Instrument Name

TD-6KV_e.book 88 ページ ２００５年１月２４日　月曜日　午後７時４分